|
USB
to Ethernet Adapter

USB To
Ethernet Adapter |
10 |
In Stock |
€ 25.00 |
|
|
| FEATURES AND SPECIFICATIONS |
|
Features :
- Fully compliant with USB 2.0
and 1.1
- Data Transfer Rate: USB 1.1
OHCI 1.5Mbps, 12Mbps; USB 2.0 EHCI 480Mbps
- Length: USB Cable 1.5m
- Standard: IEEE802.3 10BASE-T
- Bandwidth: 10BASE-T 200/100Mbps
via Auto-negotiation
- Supports all common network
protocols: TCP/IP, IPX/SPX, and NetBEUI.
- Bus Powered. No external power
is needed
- Four status LEDs: Power, 100M-ACT,
LINK, Full/Half
- Supports Windows 98/98SE/ME/2000/XP,
Linux Kernel V2.4 and later.
|
| Specification: |
-
Standards
- IEEE 802.3
- USB Specification
Version 2.0
- OHCI
- UHIC
Required
Current
500mA bus current as a standard USB high-power device
Ports
- One upstream
(USB 2.0 Type B receptacle)
- One RJ-45 (Ethernet
10BASE-T port)
Operating
Temperature
Humidity
- 5% to 95%,
non-condensing
Power
Requirements
- Bus Powered
- 2.5 W, 0.5 A @ 5 VDC
|
|
|
| |
|
|
AX88172 Controller
The AX88172 USB to Fast Ethernet/HomePNA/HomePlug Controller is a high
performance and highly integrated Controller with embedded 7K*16 bit SRAM.
The AX88172 contains a USB interface to host CPU and compliant with USB
Standard V1.0, V1.1 and V2.0. The AX88172 could be used for both 10M/100Mbps
Fast Ethernet function based on IEEE802.3 / IEEE802.3u LAN standard and
1M/10M HomePNA standard. The AX88172 supports media-independent interface
(MII) to simplify the design on implementing Fast Ethernet and HomePNA
functions.
USB
to Ethernet Adapter
|
|
|